APC Smart-UPS X 3000VA Line-Interactive LCD R T 100-127V NEMA L5-30P Input w Network Card (SMX3000LVNC)

85.00 lbs

SMX3000LVNC Features

Intuitive LCD interface - Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
High frequency design - Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
Auto recognition of external batteries - UPS recognizes when external battery packs are attached and automatically adjusts runtime.
Predictive replace battery date - Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter - Provides actual kilowatt hours of usage for energy conscious users.
Outlet group control - Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Load shedding - Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Multiple switched outlet groups - Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Preinstalled network management card - Provides for remote management and control of the UPS over a network out of the box.
StruxureWare Central compatible - Enables centralized management via StruxureWare Central.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
High online efficiency - Reduces utlility costs, generates less heat.
Cold-start capable - Provides temporary battery power when the utility power is out.
Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Disconnected battery notification - Warns when a battery is not available to provide backup power.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms - Provides notification of changing utility power and UPS power conditions.
User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
USB connectivity - Provides management of the UPS via a USB port (not available on all models).
Serial Connectivity - Provides management of the UPS via a serial port.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Scalable runtime - Allows additional run time to be quickly added as needed.
Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Rack/Tower convertible - Protects the initial investment in the UPS when migra

UPS, software CD, rack mounting hardware, rack mounting support rails, support feet, Smart UPS signalling RS-232 cable, USB cable, Web/SNMP card, documentation

7"h x 17"w x 19"d

Output Connections

(6) NEMA 5-15R (Battery Backup)
(1) NEMA L5-30R (Battery Backup)
(3) NEMA 5-20R (Battery Backup)

Input Connection: NEMA L5-30P
Cord Length: 8 feet (2.44 meters)

Output

Output Power Capacity: 2700 Watts/2880VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3Hz
Topology: Line Interactive
Waveform Type: Sine wave

Input

Nominal Input Voltage: 120V
Input Frequency: 50/60Hz +/- 3Hz (auto sensing)
Input voltage range for main operations: 70 - 153V
Transfer Time: 2-4ms

Batteries & Runtime

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof
Typical recharge time: 3 hours
Replacement Battery: APCRBC143
RBC Quantity: (1)
Battery runtime, Full Load; 6.3 minutes (2700W)
Battery runtime, Half Load; 18 minutes (1350W)

Surge Protection and Filtering

Surge energy rating: 540 Joules
Filtering: Full time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449

This product is subject to our return policy. Please see our complete return policy for details.

105.7 lbs

39121011

3 Years

3 Years

2 year warranty on battery
Equipment protection policy Lifetime: $150,000