APC Smart-UPS X 2000VA Line-Interactive LCD Rack Tower 100 127V NEMA 5-20P Input (SMX2000LVNC)

85.00 lbs

SMX2000LVNC Features

Intuitive LCD interface - Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
High frequency design - Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
Auto recognition of external batteries - UPS recognizes when external battery packs are attached and automatically adjusts runtime.
Predictive replace battery date - Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter - Provides actual kilowatt hours of usage for energy conscious users.
Outlet group control - Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Load shedding - Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
APC USB communications - Enables communication with Smart-UPS RTD, SMX and SMT using the APC's historical proprietary USB usages.
Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Multiple switched outlet groups - Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Preinstalled network management card - Provides for remote management and control of the UPS over a network out of the box.
StruxureWare Central compatible - Enables centralized management via StruxureWare Central.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
High online efficiency - Reduces utlility costs, generates less heat.
Cold-start capable - Provides temporary battery power when the utility power is out.
Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Disconnected battery notification - Warns when a battery is not available to provide backup power.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms - Provides notification of changing utility power and UPS power conditions.
User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
USB connectivity - Provides management of the UPS via a USB port (not available on all models).
Serial Connectivity - Provides management of the UPS via a serial port.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Scalable runtime - Allows additional run time to be quickly added as needed.
Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provi

UPS, software CD, rack mounting hardware, rack mounting support rails, support feet, Smart UPS signalling RS-232 cable, USB cable, Web/SNMP card, documentation

7"h x 17"w x 19"d

Output Connections

(6) NEMA 5-15R
(3) NEMA 5-20R
(1) NEMA L5-20R

Input Connection: NEMA 5-20P
Cord Length: 8 feet (2.44 meters)

Output

Output Power Capacity: 1800 Watts/1920VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3Hz
Topology: Line Interactive
Waveform Type: Sine wave

Input

Nominal Input Voltage: 120V
Input Frequency: 50/60Hz +/- 3Hz (auto sensing)
Input voltage range for main operations: 70 - 153V
Input voltage adjustable range for mains operation: 75 - 154V
Transfer Time: 2-4ms

Batteries & Runtime

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof
Typical recharge time: 3 hours
RBC Quantity: (1)

Surge Protection and Filtering

Surge energy rating: 540 Joules
Filtering: Full time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449

This product is subject to our return policy. Please see our complete return policy for details.

151 lbs

39121011

3 Years

3 Years

2 year warranty on battery