-
Temporarily Out-of-Stock
- Call for next available delivery
Ordering Information
Quick View
Getting Details
The SUINT2200LCD2U SmartOnline 2200VA/1980W On-Line Double-Conversion UPS converts AC input to DC power, and then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online and battery modes. ENERGY STAR certification saves you money by meeting strict EPA guidelines. An interactive front-panel LCD interface provides detailed real-time UPS status and advanced setup and configuration options.
In case of AC power outage, the internal batteries support 11.7 minutes of runtime at half load and 4.3 minutes at full load. Extended runtime is possible with optional external battery packs. "Smart" battery packs, such as Tripp Lite's BP48V27-2US, are automatically sensed and configured during replacement. An intelligent battery management system extends battery life.
Managing the UPS is simplified through the interactive front-panel LCD interface, which displays operating conditions and diagnostic data, such as load and battery levels. You can set power strategies to reflect your protection priorities, whether it's precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems.
Power is filtered to protect connected equipment against surges and EMI/RFI line noise that can damage equipment or destroy data. Adding an optional Tripp Lite SNMPWEBCARD accessory card permits remote management of the UPS, including reboots and activity logs.
In case of AC power outage, the internal batteries support 11.7 minutes of runtime at half load and 4.3 minutes at full load. Extended runtime is possible with optional external battery packs. "Smart" battery packs, such as Tripp Lite's BP48V27-2US, are automatically sensed and configured during replacement. An intelligent battery management system extends battery life.
Managing the UPS is simplified through the interactive front-panel LCD interface, which displays operating conditions and diagnostic data, such as load and battery levels. You can set power strategies to reflect your protection priorities, whether it's precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems.
Power is filtered to protect connected equipment against surges and EMI/RFI line noise that can damage equipment or destroy data. Adding an optional Tripp Lite SNMPWEBCARD accessory card permits remote management of the UPS, including reboots and activity logs.
-
50.94 lbs
-
Features
Converts AC input to DC power, then DC to fully regulated sine wave AC output
+/-2% voltage regulation in online and battery modes
Selectable 200/208/220/230/240V output voltage
2200VA/1980W capacity
(1) C19 and (8) C13 outlets
936-joule surge suppression rating
Reports detailed status information, including load and battery levels
Offers advanced configuration options, including output voltage and power strategies
Auto Adaptive enables high efficiency and high-quality operation as necessary for ideal equipment protection
Max Efficiency favors economy operation with high 95% efficiency
Max Quality favors on-line double-conversion mode, maintaining +/-2% output voltage regulation and zero transfer time
Frequency Regulation and Frequency Conversion enable +/-0.05 Hz output regulation for selected frequency(50/60 Hz)
Supports half load for 11.7 min. and full load for 4.3 min.
Add external battery packs for extra runtime
"Smart" battery packs, such as Tripp Lite's BP48V27-2US, are automatically sensed and configured during replacement
Full capacity available with and without external battery packs
Battery-independent restart ensures automatic power-up after lengthy power outages
Customize communications and behavior to integrate with device makers' specific needs
Selectable auto-restart from 0 to 60 sec. after AC power is restored
Selectable minimum battery charge level before auto-restart
Schedule system reboot if USB signal from connected device is lost
Set overload thresholds and low battery levels for alert and shutdown
Remote on/off support via DB-9
ENERGY STAR Certification saves money and energy and protects environment by meeting strict EPA efficiency guidelines
Optional Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates and activity logs
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD: Interactive front-panel LCD interface reports UPS operating mode, detailed UPS status and site-power information; LCD interface also enables a variety of advanced UPS setup and configuration options
Switches: (5) front panel switches: On/Off, Up, Down and Escape
Alarm Cancel Operation: Power-fail alarm can be silenced by following on-screen prompts
Audible Alarm: Audible alarm indicates power failure, low battery, overload and fault
LED Indicators: (4) front panel LEDs: AC input (green), AC output (green), Battery (yellow), Fault (red) -
# Ports: 9Communication Interface: Serial (RS-232)Communication Interface: USBConnector: Power IEC 320 EN 60320 C13 (F)Connector: Power IEC 320 EN 60320 C14 (M)Connector: Power IEC 320 EN 60320 C19 (F)Connector: Power IEC 60320 C20
-
UPS, 4-post rack-mount installation kit, USB cable, RS-232 cable, C19-to-C20 power cable, (2) C13-to-C14 power cables, documentation
-
Attributes: Double conversion onlineColor: BlackForm Factor: 2U RackmountForm Factor: Rack-mountableWarranty Period: 2 yearsWeight Taxonomy: 50.93lbs
-
3.5"h x 17.25"w x 19.5"d
-
Output Receptacles: (8) C13; (1) C19
Included Output Power Cables: Includes 2 C13 to C14 and 1 C19 to C20 power cables
Load Management Receptacles: Two switchable outlet load banks (Bank 1: 3 C13 outlets / Bank 2: 1 C19 + 2 C13 outlets)
UPS Input Connection Type: C20 inlet
-
Battery Run Time (max): 4.3minBattery Run Time (max): 6minPower Capacity (VA): 2200VAPower Provided: 1980Power Provided: 1980WPower Provided: 2000Surge Suppression: YesVoltage Provided: 230VVoltage Provided: 48V
-
OUTPUT
Output Capacity: 2200VA/1980W
Output Capacity Details: DE-RATING INFORMATION - Max output in Frequency Conversion mode is reduced to 1386 watts for 208/220/230/240V output voltages; Max output is 1584W (1108W in Frequency Conversion mode) at 200V output voltage; OVERLOAD CAPACITY - Supports inverter operation up to 105% load continuously, 125% for 3 minutes, 150% for 30 seconds and >150% for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits).
Power Factor: 0.9
Crest Factor: 3:1
Nominal Output Voltages Supported: 200V; 208V; 220V; 230V; 240VAC
Nominal Voltage Details: Nominal output voltage is user configured on first power-on
Frequency Compatibility: 50/60Hz; Supports 50 to 60Hz and 60 to 50Hz conversion
Frequency Compatibility Details: Output frequency matches input nominal on startup; Output capacity de-rates by 30% during frequency conversion operation
Output Voltage Regulation (Line Mode): +/- 2%
Output Voltage Regulation (Economy Line Mode): +/- 10%
Output Voltage Regulation (Battery Mode): +/- 2%
Output AC Waveform (AC Mode): Pure Sine wave
Output AC Waveform (Battery Mode): Pure Sine wave
INPUT
Rated input current (Maximum Load): 10.94A
Nominal Input Voltages Supported: 200VAC; 208VAC; 220VAC; 230VAC; 240VAC
Input Phase: Single-Phase
BATTERY
Full Load Runtime: 4.3 min. (1980w)
Half Load Runtime: 11.7 min. (990w)
Expandable Battery Runtime: Supports extended runtime with optional external battery packs
External Battery Pack Compatibility: BP48V24-2U(limit 1); BP48V27-2US(multi-pack compatible); BP48V60RT-3U(multi-pack compatible)
DC System Voltage: 48VDC
Battery Recharge Rate (Included Batteries): Less than 3.0 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge: RBC48S
Battery Access: Front panel battery access door
Battery Replacement Description: Hot-swappable, replaceable batteries
Expandable Runtime: Yes
VOLTAGE REGULATION
Voltage Regulation Description: Online, double-conversion power conditioning
Overvoltage Correction: 2% output voltage regulation during overvoltages to 288V
Undervoltage Correction: 2% output voltage regulation during undervoltages to 160V (100% load), 130V (70% load), 100V (30% load)
SURGE / NOISE SUPPRESSION
UPS Dataline Suppression Details: Single line dialup / network dataline protection included
EMI / RFI AC Noise Suppression: Yes
AC Suppression Rating: 936 Joules
AC Suppression Response Time: Instantaneous -
This product is subject to our return policy. Please see our complete return policy for details.
-
61 lbs
-
Compliant Standards: CECompliant Standards: CSACompliant Standards: EACCompliant Standards: FCC CFR47 Part 15Compliant Standards: FCC Part 15Compliant Standards: IEC 62040-1Compliant Standards: IEC 62040-1:2008Compliant Standards: IEC 62040-2:2006Compliant Standards: SASOCompliant Standards: UL 1778
-
39121011
| Description | Availability | Unit Price | ||
|---|---|---|---|---|
| View All Warranties | ||||
14