-
In Stock
- Ships in 1-2 Business Days
Ordering Information
$351.41
Quick View
Getting Details
The Dual 4K HDMI HDBaseT + VGA, 3.5mm, and RS232 over Cat Switching Extender Box Transmitter - 4K 60Hz allows 4K HDMI or VGA sources to be extended using a single Cat6a Ethernet cable. This is an ideal solution where video and audio needs to be extended to displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard cabling.
This transmitter extends HDMI and VGA signals over a single network patch cable. Extend 4K HDMI up to 115 feet and 1080p VGA up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable.
This HDMI HDBaseT transmitter is HDCP 2.2 compliant, making sure that the connection from the source is secure. With bi-directional PoC support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. The USB Micro-B input supports necessary firmware updates. Advanced users can control one-way IR pass through from the transmitter to the connected receiver and also control and configure both local and remote devices via RS232.
This transmitter extends HDMI and VGA signals over a single network patch cable. Extend 4K HDMI up to 115 feet and 1080p VGA up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable.
This HDMI HDBaseT transmitter is HDCP 2.2 compliant, making sure that the connection from the source is secure. With bi-directional PoC support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. The USB Micro-B input supports necessary firmware updates. Advanced users can control one-way IR pass through from the transmitter to the connected receiver and also control and configure both local and remote devices via RS232.
-
Extend 4K at 60Hz (4:2:0) up to 130ft and 1080p at 60Hz up to 230ft with Cat 6a cable
Extend 4K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable
Supports VGA resolutions up to 1920x1200 at 60Hz
Supports automatic switching between input sources
HDCP 2.2 compliant, to create a secure connection between the source and display
All input audio source EDIDs are fixed at PCM 2CH
HDMI input EDIDs are copied from HDBaseT receiver (limited below 4K 30Hz)
VGA input EDID is fixed at 1080p 60Hz
All HDMI and VGA EDIDs can be configured by API CMD
Automatic CEC command to Power on/off display device, by detecting input signal status
Control and configure both local and remote devices via RS232
One-way IR pass through from the TX to the connected RX
Bi-directional PoC, one power adapter at either transmitter or receiver side can power both units
HDBaseT Chipset VS010, for simpler HDBaseT installations
Works with C2G30015 and C2G30016 receivers -
Connectivity Technology: Wired
-
Transmitter, Power Adapter, 3-Pin Phoenix Male Connector, (2) Mounting Bracket (with screws), documentation
-
Color: BlackForm Factor: ExternalProduct Type: AV ExtenderWarranty Period: 3 years
-
Networking Type: Video/audio/serial extender
-
Data Transfer Rate: 10.2Gbps
-
Input :
(1) VGA Female, (1) 3.5mm Female, (2) HDMI Female, (1) DC Power Plug, (1) USB Micro-B Female
Output :
(1) RJ-45 Female -
Networking Protocol: HDBaseTNetworking Protocol: HDMINetworking Protocol: PoCNetworking Protocol: VGA
-
This product is subject to our return policy. Please see our complete return policy for details.
-
1.76 lbs
-
Compliant Standards: EDID compatible
-
43222619
-
3 Years
-
3 Years
| Description | Availability | Unit Price | ||
|---|---|---|---|---|
| View All Warranties | ||||
10