APC Smart-UPS X 2000VA Short Depth 4U Tower Rack Convertible LCD 100-127V (SMX2000LVNCUS)

85.00 lbs

Adjustable voltage sensitivity:
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points:
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

APC USB communications:
Enables communications with SMX, SMT, SRT and SURTD Smart-UPS models using historical APC proprietary USB usages.


Audible alarms:
Provides notification of changing utility power and UPS power conditions

Auto recognition of external batteries:
UPS recognizes when external battery packs are attached and automatically adjusts runtime.

Automatic restart of loads after UPS shutdown:
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test:
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification:
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR):
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.

Cold-start capable:
Provides temporary battery power when the utility power is out.

Disconnected battery notification:
Warns when a battery is not available to provide backup power.

Energy meter:
Provides actual kilowatt hours of usage for energy conscious users.

Green mode:
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High frequency design:
Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.

High online efficiency:
Reduces utlility costs, generates less heat.

Hot-swappable batteries:
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intuitive LCD interface:
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Load shedding:
Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).

Multiple mounting methods:
Allows for standardization on one product for use in different environments.

Multiple switched outlet groups:
Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Network manageable:
Provides proactive notifications of changing power or unit conditions and provides the user the ability to remotely control PMU functions.

Outlet group control:
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Predictive replace battery date:
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Preinstalled network management card:
Provides for remote management and control of the UPS over a network out of the box.

Pure sine wave output on battery:
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Rack/Tower convertible:
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Safety-agency approved:
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Scalable runtime:
Allows additional run time to be quickly added as needed.

Sequenced net

UPS, network management card, Smart-UPS signallling RS-232 cable, USB cable, rack mount support rails and hardware, removable support feet, CD with PowerChute Business Edition software, documentation CD

17"H x 7"W x 19"D"

Communications & Management
Interface Port(s): RJ-45 Serial, USB
Control Panel: LED status display with On Line, On Battery, Replace Battery and Overload indicators, Multi-function LCD status and control console
Audible Alarm: Alarm when on battery, distinctive low battery alarm, configurable delays

Output
Output Power Capacity: 1800 Watts / 1920VA
Max Configurable Power: 1800 Watts / 1920VA
Nominal Ouput Voltage: 120V
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 50/60Hz +/- 3Hz (auto sensing)
Topology: Line interactive
Waveform Type: Sine Wave
Output Connections: (6) NEMA 5-15R, (3) NEMA 5-20R, (1) NEMA L5-20R

Input
Nominal Input Voltage: 120V
Input Frequency: 50/60Hz +/- 3Hz (auto sensing)
Input Connections: NEMA 5-15P
Cord Length: 2.44 meters
Input Voltage Range for Main Operations: 70 - 153V
Input Voltage Adjustable Range for Mains Operation: 75 - 154V

Batteries & Runtime
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof
Typical Recharge Time1 : 3 hour(s)
RBC Quantity: 1

Surge Protection & Filtering
Surge Energy Rating: 540 Joules
Filtering: Full-time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449

This product is subject to our return policy. Please see our complete return policy for details.

105 lbs

39121011

3 Years

3 Years

3 years repair or replace (excluding battery) and 2 year for battery
Equipment Protection Policy: Lifetime : $150,000