Tripp Lite SmartPro UPS 3KVA 120V Line Interactive Sine Wave Lithium, 2U RM, LCD (Smart3000RM2UL)

50.10 lbs

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery:
This Tripp Lite SmartPro UPS system features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100-percent capacity in less than two hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery is field-replaceable and hot-swappable. It also weighs 60-percent less than an equivalent lead acid battery, which also reduces the overall UPS weight.

120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures:
The SMART3000RM2UL provides up to 9.5 minutes (half load) and 3.5 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase UPS system gives you enough time to save important data and perform an orderly system shutdown. With a 2250W capacity (3000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V–145V without using battery power.

Protect Your Mission-Critical Rack Equipment:
Plug your equipment into the eight NEMA 5-15/20R and one NEMA L5-30R outlets. Two 5-15/20R outlets are switchable, allowing you to power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All nine outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

ENERGY STAR Certification Helps the Environment and Your Cash Flow:
Operating with a high 98% line-mode efficiency, the ENERGY STAR-certified 3kVA UPS system can save BTU heat output and energy costs by meeting strict EPA guidelines.

Advanced Communications Ports Connect to Any Workstation or Server:
USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite’s free downloadable PowerAlert® software. Capabilities include monitoring of equipment load level, self-test data and utility power conditions. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency. The SMART3000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Multi-Function LCD and Audible Alarms Keep You Informed:
The front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions.

Versatile Installation Options:
Hardware is included for mounting the Tripp Lite SmartPro UPS system in 2U of space in an EIA-standard 19-inch 4-post rack. Use the optional 2POSTRMKITWM for 2-post rack mounting or wall mounting. Use the optional 2-9USTAND for mounting in an upright tower position. A 10-foot power cord with NEMA L5-30P plug connects the SMART3000RM2UL to a compatible AC power source.

UPS, USB cable, DB9 cable, EPO cable, rack mounting hardware, documentation

3.43"H x 17.43"W x 19.46"D

Output Volt Amp Capacity (VA): 3000
Output kVA Capacity (kVA): 3
Output Watt Capacity (Watts): 2250
Output kW Capacity (kW): 2.25
Power Factor: 0.75
Nominal Output Voltage(s) Supported: 110V; 115V; 120V
Nominal Voltage Details: 120v nominal output in battery mode
Frequency Compatibility: 60 Hz
Output Voltage Regulation (Line Mode): -14%, +6%
Output Voltage Regulation (Battery Mode): +/- 5%
Output Receptacles: (8) 5-15/20R; (1) L5-30R
Load Management Receptacles: Two switchable single-outlet load banks
Output AC Waveform (AC Mode): Pure Sine wave
Output AC Waveform (Battery Mode): Pure Sine wave

Rated input current (Maximum Load): 12A (120V)
Nominal Input Voltage(s) Supported: 110V AC; 115V AC; 120V AC
UPS Input Connection Type: L5-30P
UPS Input Cord Length (ft.): 10
Recommended Electrical Service: 30A 120V
Input Phase: Single-Phase

Full Load Runtime (min.): 3.5 min. (2250w)
Half Load Runtime (min.): 9.5 min. (1125w)
DC System Voltage (VDC): 48
Battery Recharge Rate (Included Batteries): 1.7 hours from 10% to 90% (typical, full load discharge)
Battery Replacement Description: Hot-swappable, user replaceable batteries
Expandable Runtime: No

Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction: Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%

Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

UPS AC Suppression Joule Rating: 570
UPS AC Suppression Response Time: Instantaneous
EMI / RFI AC Noise Suppression: Yes

Included Mounting Accessory Description: 4 post rackmount installation accessories included
Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories: 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND); 2-4 post front rail rackmount (UPSHDEARKIT); accessories sold separately
Primary Form Factor: Rackmount
Rack Height (U Spaces): 2
Minimum Required Rack Depth (inches): 24.5
Cooling Method: Fan
UPS Housing Material: Steel

Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity: 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load): 189
AC Mode Efficiency Rating (100% Load): 98%
Audible Noise: 45 dBA Max @ 1m front side

Communications Interface: USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Management Cards: SNMPWEBCARD; TLNETCARD; WEBCARDLX; RELAYIOCARD
Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
PowerAlert Software: Included
Communications Cable: USB, DB9 and EPO cabling included
WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility: NUT compatible. See the full list of Tripp Lite

This product is subject to our return policy. Please see our complete return policy for details.

63.9 lbs

39121011