Tripp Lite 2U UPS 120V 2.2KVA 1.92kW, Line-Interactive Sine Wave, (LiFePO4) Battery, LCD, (Smart2200RM2UL)

41.78 lbs

UPS, USB cable, DB9 cable, EPO cable, rack-mounting hardware, documentation

Protects Mission-Critical Rack-Mounted Equipment:
Provides fully regulated sine wave AC output for servers, network storage devices, telecom hardware and other applications where long battery lifespan is critical
Audible alarm signals loss of utility power, overload and low battery
8 NEMA 5-15R outlets
10 ft. power cord with 120V NEMA 5-20P input
570-joule surge suppression rating
0.9 power factor rating
97% line-mode efficiency rating saves money in energy costs

Superior LiFePO4 Battery Backup Compared to Equivalent Lead Acid Battery:
More than 2x the service life
Up to 3x more charge/discharge cycles
Recharges to 100% capacity in less than 2 hr.
Weighs 60% less, reducing overall UPS weight
Designed for hot-swap field replacement
Supports half load up to 11.7 min. and full load up to 5.1 min.

2 Load Banks with Switchable Outlets:
Can control 2 outlets remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR):
Maintains 120V nominal output over input range of 83V–145V without using battery power

EMI/RFI Line Noise Filtering:
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance

Interactive LCD Screen:
Front-panel LCD with detailed UPS and site power status and operating data
Rotates for easy viewing in rack-mount or tower configurations

Versatile Installation Options:
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Mounts in upright tower position with optional 2-9USTAND accessory

3.43"H x 17.32"W x 19.46"D

Communications
Communications Interface: USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Management Cards: SNMPWEBCARD; TLNETCARD; WEBCARDLX; RELAYIOCARD
Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
PowerAlert Software: Available via free download (www.tripplite.com/poweralert)
Communications Cable: USB, DB9 and EPO cabling included
WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility: NUT compatible.

Output
Output Volt Amp Capacity (VA): 2200
Output kVA Capacity (kVA): 2.2
Output Watt Capacity (Watts): 1920
Output kW Capacity (kW): 1.92
Power Factor: 0.87
Nominal Output Voltage(s) Supported : 110V; 115V; 120V
Nominal Voltage Details: 120v nominal output in battery mode
Frequency Compatibility: 60 Hz
Output Voltage Regulation (Line Mode): -14%, +6%
Output Voltage Regulation (Battery Mode): +/- 5%
Output Receptacles: (4) 5-15R; (4) 5-15/20R
Load Management Receptacles: Two switchable single-outlet load banks
Output AC Waveform (AC Mode): Pure Sine wave
Output AC Waveform (Battery Mode) : Pure Sine wave

Input
Rated input current (Maximum Load): 16A (120V)
Nominal Input Voltage(s) Supported: 120V AC
UPS Input Connection Type: 5-20P
Input Circuit Breakers: 20A
UPS Input Cord Length (ft.): 10
Recommended Electrical Service: 20A 120V
Input Phase: Single-Phase

Battery
Full Load Runtime (min.): 5.1 min. (1920w)
Half Load Runtime (min.): 11.7 min. (960w)
DC System Voltage (VDC): 48
Battery Recharge Rate (Included Batteries): 1.4 hours from 10% to 90% (typical, full load discharge)
Expandable Runtime: No

Voltage Regulation
Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction: Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction: Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction: Input voltages between 83 and 95 are boosted by 24%

User Interface, Alarms, and Controls
Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Surge/Noise Suppression
UPS AC Suppression Joule Rating: 570
UPS AC Suppression Response Time: Instantaneous
EMI / RFI AC Noise Suppression: Yes

Environmental
Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity: 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load): 221
Battery Mode BTU / Hr. (Full Load): 1343
AC Mode Efficiency Rating (100% Load): 97%
Audible Noise: 45 dBA Max @ 1m front side

Line/Battery Transfer
Transfer Time: 5 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
Low Voltage Transfer to Battery Power (Setpoint): 83
High Voltage Transfer to Battery Power (Setpoint): 145

Special Features
Grounding Lug Back: Banel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
High Availability UPS Features: Hot swappable batteries
Green Energy-Saving Features: Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

This product is subject to our return policy. Please see our complete return policy for details.

55 lbs

39121011