HPE ProLiant DL380 Gen10 2U RM Xeon 16C Gold 6242 2.8GHz 32GB 8x2.5" HP bays P408i-a 2x25GbE 1x800W

There are 24 DIMM slots in total, with 12 slots per processor.

Memory Subsystem Architecture:
Each Intel Xeon family processor socket contains four memory channels per installed processor with three DIMMs per channel for a total of twelve (12) DIMMs or a grand total of twenty-four (24) DIMMs for the server.

Memory maximums:
With LRDIMMs: 3TB (24x128GB LRDIMM)
With RDIMMs: 768GB (24x32GB RDIMM)

Memory Protection
Advanced ECC:
Advanced ECC uses single device data correction to detect and correct single andall multibit error that occurs within a single DRAM chip.
Online spare:
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.

Memory Population Rules and Guidelines:
Do not mix RDIMMs or LRDIMMs.
A minimum of one DIMM is required per server.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors and to load the channels similarly whenever possible.
When two processors are installed, balance the DIMMs across the two processors.
LRDIMMs are supported up to 3 DIMMs per channel.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible with the DL380 Gen10 Server. Certain HP SmartMemory features such as memory authentication and enhanced performance may not be supported.

Supported operating systems include:
Microsoft Windows Server 2016/2012 RS
Red Hat Enterprise Linux (RHEL) 7.3/6.9
SUSE Linux Enterprise Server (SLES) 12SP2/11SP4
VMware ESXi 6.5 and U1 (upon release)/6.0 U3
ClearOS

3.4"h x 17.5"w x 28.8"d

Expansion slots:
Slot 1: PCIe 3.0 x8, x8 (full-height, half-length, processor 1)
Slot 2: PCIe 3.0 x16, x16 (full-height, full-length, processor 1)
Slot 3: PCIe 3.0 x8, x8 (full-height, half-length, processor 1)
Slot 4: PCIe 3.0 x8, x8 (full-height, half-length, processor 2)
Slot 5: PCIe 3.0 x16, x16 (full-height, full-length, processor 2)
Slot 6: PCIe 3.0 x8, x8 (full-height, half-length, processor 2)
(1) Micro SD (internal)
NOTE: The Micro SD slot is not a hot-pluggable device. Do not attempt to plug an SD card into the SD slot while the server is powered.

I/O:
(1) VGA (standard on rear; one additional on front via optional Universal Media Bay, not active simultaneously)
(5) USB 3.0 (1 front, 2 rear, 2 internal secure)*
(4) FlexibleLOM
(1) DisplayPort (front; optional via Universal Media Bay; standard on 8xLFF bay chassis)
(1) GbE dedicated iLO remote management
(1) iLO service (front; not available on 12xLFF chassis or when SID is ordered)
(2) Power in
* Two additional front USB 2.0 ports available via optional Universal Media Bay or standard on 8xLFF bay chassis

Power:
Supports up to (2) hot-plug power supplies

This product is subject to our return policy. Please see our complete return policy for details.

44.75 lbs

43211501